The Dr Phase plugin can add movement and unique character to any instrument it’s applied to. You could use it on pretty much any instrument channel, including synths. It’s not limited to guitar tracks by any means, reports Producer Feed<\/em><\/a><\/span><\/strong>.<\/p>\n\n\n\n The MXR Phase 90 pedal, originally designed by Jim Dunlop, was renowned for its simple interface. A user could select between a subtle and shimmery phase effect all the way to a high-velocity swooshing sound. Audiority\u2019s Dr Phase is visually similar to the original MXR pedal. But, to modernise the pedal, Audiority has digitized the features and effects. Huzzah!<\/p>\n\n\n\n Lets’ talk about its features, shall we? Changing the \u2018speed<\/strong>\u2019 dial on the plugin’s interface will change the frequency of the phaser. At a lower speed, the effect will be that of the subtle shimmer we mentioned. In contrast, a higher speed will create that wavy sound that phasers<\/a><\/span><\/strong> are known for.<\/p>\n\n\n\n Whether you automate or manually turn it on or off, you can do this via a switch that sits under the ‘speed’ feature.<\/p>\n\n\n\n As we’re dealing with phase, aliasing may become an issue. So, the \u2018HQ<\/strong>\u2019 button enables oversampling to help reduce aliasing when you saturate your signal.<\/p>\n\n\n\n Included, too, is a \u2018Vintage Mode<\/strong>\u2019 that can create a sound that calls back to the 70s and 80s when phaser effect pedals were used by most guitar players. Vintage mode removes the feedback resistor from the circuit for a smoother phasing effect.<\/p>\n\n\n\n Standard with global controls on plugins, Dr Phase features \u2018in<\/strong>,\u2019 \u2018out<\/strong>,\u2019 and \u2018mix<\/strong>\u2019 parameters you can control.<\/p>\n\n\n\n Dr Phasen is available in 64-bit for both Windows and macOS, and is available as a VST2<\/strong>, VST3<\/strong>, and AU <\/strong>plugin<\/p>\n\n\n\nOther Features of Dr Phase<\/h4>\n\n\n\n